聚氨酯保溫鋼管如何運用
How to Use Polyurethane Thermal Insulation Pipe
1.下降工程造價，雙控制供熱管道，普通狀況下可以下降工程造價的25%(選用玻璃鋼做維護層)和10%(選用高密度聚乙烯做維護層)左右。
1. To reduce the cost of construction, double-control heating pipeline can reduce the cost of construction by 25% (using FRP as maintenance layer) and 10% (using high density polyethylene as maintenance layer) under normal conditions.
2. 熱損耗低，浪費動力，聚氨酯保溫鋼管其導熱系數爲：比其他曩昔常用的管道保溫資料低得多，保溫作用提高4~9倍。再有其吸水率很低，約爲0.2kg/m2。吸水率低的緣由是由于聚氨酯泡沫的閉孔率高達92%左右。低導熱系數和低吸水率，加上保溫層和里面防水功能好的高密度聚乙烯或玻璃鋼維護殼，改動了傳統地溝敷設供熱管道“穿濕棉襖”的狀況，大大增加了供熱管道的全體熱損耗，熱網熱損失爲2%，小于世界10%的標準要求。
2. Low heat loss and waste of power. The thermal conductivity of polyurethane insulating pipe is much lower than that of other commonly used pipelines, and its thermal insulation effect is increased by 4-9 times. And its water absorption is very low, about 0.2 kg/m2. The reason for low water absorption is that the polyurethane foam has a closed porosity of about 92%. Low thermal conductivity and low water absorption, together with insulation layer and waterproof high density polyethylene or FRP maintenance shell, have changed the situation of traditional trench laying heating pipeline "wearing wet cotton jacket", greatly increased the overall heat loss of heating pipeline, heat loss of heating network is 2%, less than the world standard requirements of 10%.
3.聚氨酯保溫鋼管具有防腐，絕緣功能好，運用壽命長。直埋保溫管由于聚氨酯硬質泡沫保溫層緊密地粘結在鋼管外皮，隔絕了空氣和水的進入，能起到出色的防腐作用。預制直埋保溫管同時它的發泡孔都是閉合的，吸水性很小。高密度聚乙烯外殼.玻璃鋼.聚氨酯保溫鋼管外殼均具有出色的防腐.絕緣和機械功能。因此，任務鋼管外皮很舒服到外界空氣和水的腐蝕。鋼套鋼蒸汽保溫管只需管道外部水質處置好，據國外資料引見，聚氨酪保溫管聚氨酪保溫管道的運用壽命可達50年以上，比傳統的地溝敷設.直埋保溫管廠家架空敷設運用壽命高3~4倍
3. Polyurethane insulating steel pipe has anticorrosion, good insulation function and long service life. The directly buried insulation pipe is tightly adhered to the outer skin of the steel pipe because of the rigid polyurethane foam insulation layer, which blocks the entry of air and water, and can play an excellent anti-corrosive effect. At the same time, the foam holes of the prefabricated directly buried insulating pipe are closed, and the water absorption is very small. High density polyethylene shell, FRP and PU insulating steel tube shell all have excellent anti-corrosion, insulation and mechanical functions. Therefore, the task steel pipe skin is very comfortable to the outside air and water corrosion. According to foreign data, the service life of polyurethane insulation pipe and polyurethane insulation pipe can reach more than 50 years, which is 3-4 times longer than that of traditional trench laying. Overhead laying service life of directly buried insulation pipe manufacturer is 3-4 times longer than that of traditional trench laying.
4.國外消費聚氨酯保溫鋼管，直埋保溫管廠家均設有滲漏報警線，一旦管道某處發作滲漏，經過報警線的傳導。便可在公用檢測儀表上顯示出保溫管道滲水.漏水的準確方位及滲漏水平的巨細，以便通知檢滲人員矯捷處置漏水的管段，保證供熱管網的平安運轉。
4. Foreign consumer polyurethane insulating steel pipes and directly buried insulating pipe manufacturers all have leakage alarm lines. Once leakage occurs somewhere in the pipeline, it is transmitted by the alarm lines. In order to inform the inspectors to deal with the leaking pipeline quickly and ensure the safe operation of the heating network, the exact position and the size of the leaking pipeline can be displayed on the public inspection instrument.
In summary, all the above-mentioned Shandong Hipper Pipe Technology Development Co., Ltd. provides, want to know more about polyurethane insulation pipe manufacturers, welcome to pay attention to our website: http://www.weigh.cc Thank you for your support!
