Polyurethane insulated steel pipe is an important application pipe, which plays an important role in energy and heat supply, so its quality requirements are particularly strict. Before leaving the factory, it must be tested, which mainly includes steel pipe specification, steel pipe material, insulation layer thickness, etc.

　　就目前安裝情況來說，聚氨酯保溫鋼管不需要專門的地溝，直接埋入土中就可以，保溫和防腐效果是其他管道不能比擬的，此外哦，聚氨酯保溫鋼管由于保溫效果突出還具備一定的作用，同樣的管道，保溫效果好可以降低輸送過程中的熱損失達到目的。

　　As far as the current installation situation is concerned, polyurethane insulated steel pipe does not need a special trench, but can be directly buried in the soil. The insulation and anti-corrosion effects are incomparable with other pipes. In addition, polyurethane insulated steel pipe has a certain energy-saving effect due to its outstanding insulation effect. For the same kind of pipes, good insulation effect can reduce the heat loss in the transportation process to achieve the purpose of energy conservation.

　　根據相關部門的測算以及實際使用情況，1聚氨酯保溫鋼管管道相比其他管道每年可以節省燃煤10噸左如果全部供暖管道都是用聚氨酯保溫鋼管的話，每年可以節省大量的燃煤，不僅節省了費用還保護了環境。

　　According to the calculation and actual use of relevant departments, 1 km polyurethane insulated steel pipe can save 10 tons of coal annually compared with other pipes. If all heating pipes are polyurethane insulated steel pipes, a large amount of coal can be saved every year, which not only saves the cost but also protects the environment.

　　聚氨酯保溫鋼管質量檢測依據規程標準

　　Standard for quality inspection of polyurethane insulated steel pipe

　　TSGD0001-2009 壓力管道技術監察規程——工業管道

　　Tsgd0001-2009 supervision code for safety technology of pressure pipeline - industrial pipeline

　　TSGD2001-2006 壓力管道元件制造許可規則

　　Tsgd2001-2006 pressure pipe components manufacturing license rules

　　TSGD2002-2006 壓力管道元件型式試驗規則

　　Tsgd2002-2006 type test rules for pressure piping components

　　GB/T20801.1～6-2006 壓力管道規范 工業管道

　　GB / t20801.1-6-2006 pressure piping code industrial piping

　　SY/T0415-96 埋地鋼質管道硬質聚氨酯泡沫塑料防腐保溫層技術標準

　　Technical standard of SY/T0415-96 rigid polyurethane foam plastic insulation coating for buried steel pipeline

　　SY/T5037-2000 低壓流體輸送用螺旋縫埋弧焊鋼管 GB50236-98 現場設備工業管道焊接工程施工及驗收規范

　　SY / t5037-2000 code for construction and acceptance of spiral submerged arc welded steel pipe for low pressure fluid transportation gb50236-98 field equipment industrial pipeline welding engineering

　　GB8923-88 涂裝前鋼材銹蝕等級和除銹等級

　　Gb8923-88 rust grades and derusting grades of steel before coating

　　SY0063-92 管道防腐層檢漏試驗方法

　　Sy0063-92 leakage test method of pipeline anticorrosive coating

　　CJJ/28-2004 城鎮供熱管網工程施工及驗收規范

　　CJJ / 28-2004 code for construction and acceptance of urban heating pipe network engineering

　　GB/T9711.1-1997 石油、天然氣工業輸送鋼管交貨技術條件1A級鋼管

　　GB / T9711.1-1997 Technical delivery conditions of steel pipes for petroleum and natural gas industries grade 1A steel pipes

　　SY/T5037-2000 低壓流體輸送用螺旋縫埋弧焊鋼管

　　SY / t5037-2000 spiral submerged arc welded steel pipe for low pressure fluid transmission

　　GB/T12459-2005 鋼制對焊無縫管件

　　Steel butt welded seamless pipe fittings (GB / t12459-2005)

　　GB/T13401-2005 鋼板制對焊管件

　　Steel plate butt welded pipe fittings (GB / t13401-2005)

　　GB2828 逐步檢查計數抽樣程序集抽樣表

　　GB2828 sampling table of sampling procedure set for step by step inspection

　　聚氨酯保溫鋼管對于生產環境的要求

　　Requirements of polyurethane insulated steel pipe for production environment

　　1. 風力因素： 噴涂作業時，要求風速在 5m /s 以下。因為風速超過 5m /s ，將吹失反應產生的熱量，以致影響聚氨酯泡沫快速發泡反應，使產品表面變脆。同時，由于噴涂發泡機將原料混合好后，以霧化狀態噴出，如風速過大，將會吹走霧化顆粒，增大原料損耗，污染環境。

　　1. Wind factor: when spraying, the wind speed is required to be less than 5m / s. Because the wind speed exceeds 5m /s, the heat generated by the reaction will be lost, which will affect the rapid foaming reaction of the polyurethane foam and make the surface of the product brittle. At the same time, because the spray foaming machine will mix the raw materials and spray them out in the atomized state, if the wind speed is too high, the atomized particles will be blown away, the loss of raw materials will be increased, and the environment will be polluted.

　　2.溫度因素： 噴涂時，現場環境溫度和待噴基材表面溫度范圍應該在 15 ℃ ～ 35 ℃ 。如果溫度過低，聚氨酯泡沫和基材的粘接力就會降低，且噴涂硬泡產品的密度就會明顯增大;如果溫度過高，發泡劑損耗太大，不經濟。

　　2. Temperature factor: during spraying, the field ambient temperature and the surface temperature of the substrate to be sprayed shall be within 15 ℃ ~ 35 ℃. If the temperature is too low, the adhesion between polyurethane foam and base material will be reduced, and the density of the product will increase obviously. If the temperature is too high, the foaming agent will lose too much and is not economical.

　　聚氨酯保溫鋼管生產現場

　　Polyurethane insulated steel pipe production site

　　3.基材表面因素： 聚氨酯硬質泡沫是異氰酸酯和組合聚醚雙組分混合反應生成的高分子產品，其中異氰酸酯組分很容易和水反應生成脲，如果聚氨酯中脲鍵含量升高，則泡沫塑料將變脆，泡沫與基材的粘接力降低。因此，要求待噴基材表面清潔干燥，要求無銹、無粉塵、無污染、無潮氣。若有露水或霜，應予以去除和干燥。

　　3. substrate surface factors: polyurethane rigid foam is a polymer product produced by mixed reaction of isocyanate and combined polyether, and the isocyanate component is easily reacted with water to form urea. If the content of urea bond in polyurethane increases, then the foamed plastics will become crisp and the adhesion between foam and substrate will be reduced. Therefore, the surface of the substrate to be sprayed shall be clean and dry, without rust, dust, pollution and moisture. If there is dew or frost, it should be removed and dried.

　　聚氨酯發泡保溫管道道在施工的時候有些情況是不能逆轉的，在安裝聚氨酯發泡保溫管道的時候要使用正確的方法，有一點不對的話就不能將他的功能很好的展現出來，所以多余管道保溫技術來說，他在以后的發展趨勢上進行分析，更能夠?qū)鴥?nèi)的經濟帶來很大的影響。

　　In the construction of polyurethane foam insulation pipeline, some situations can not be reversed. When installing polyurethane foam insulation pipeline, the correct method should be used. If there is one mistake, it can not show its function well. So in terms of redundant pipeline insulation technology, it can bring a lot to the domestic economy by analyzing its development trend in the future Influence.